Uniden ANA 9310 - Manual (Page 29)

Handset Ringer tone and volume
Pressing RING/VOL on the side of the Handset in standby mode
to select seven ringer tones and volume combinations.
Vibrate Mode
“Ring off” shown on the above display is the Vibrate Mode.
If you set the ringer off and the Handset is not on the charger,
the Handset will vibrate when there is an incoming call.
If you set the ringer off and the Handset is on the charger, the Handset
will ring as Ring Type-A Low.
Handset Ringer Mute
You can temporarily mute the handset ringer tone.
In standby mode, press and hold ON/OFF MUTE on the side of the
handset for 2 seconds. You will see the ring off icon.
If you press and hold the key for 2 seconds again also in standby
mode, the ring off icon will disappear.
23
31
Y:...ANA9310 om.vp
Tue Dec 03 14:44:12 2002
Color profile: Disabled
Composite Default screen