Uniden UBC780XLT - Manual (Page 28)

18
Programming
Before the UBC780XLT can begin conventional scanning, you must program a frequency
into at least one channel. Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels
1. Select desired frequency.
Here is a list of sample frequencies you can try:
156.800 Marine Calling channel
468.400 Police Channel
476.425 UHF CB
2. Press MAN .
3. Select a channel.
a. Enter the channel number.
b. Then press
MAN .
4. Enter the frequency.
a. Enter the frequency number.
b. Then press
E .
Note: • To clear a mistake while entering the frequency, press (decimal key) repeatedly
until the display is cleared.
• If you enter a channel or frequency which is out
of the scanner’s range, a distinctive beep will
sound and
ERROR appears in the display.
• You can use ▲ or ▼ when selecting a channel.
Press and hold ▲ or ▼ for 1 second to move up/down more quickly.