Ultra Products Nordson v051806 - Manual (Page 2)

The core of our Ultra System ®
It’s the unique design and production of EFD ® syringe
barrels, pistons and dispense tips that significantly
improve assembly fluid applications. The Ultra system
makes dispensing easier, more controlled and safer, and
these features translate directly into reduced costs.
If your dispense tip is blocked by metal burrs or “flash”
from the molding process, if the syringe barrel is
contaminated with dust or silicone, or if the piston isn’t a
precise fit, the amount of fluid you apply is going to vary.
Unfortunately, most disposable components look pretty
similar from the outside. Companies that think they’re
saving money with “budget” tips and barrels often don’t
realize there is a difference — until reject rates start to
climb, or even worse, their products fail in the field.
Consistent Components =
Consistent Fluid Deposits
With an EFD dispense system, you never worry about
these problems. All EFD dispense tips, syringe barrels and
pistons are precision molded in our own silicone-free US
facilities, rigorously inspected and carefully packaged in
clean, contaminant-free containers. Consistent product
performance is guaranteed.
Hubs
Tubing
Which components
would you rather use?
Theirs
“Flash” inside hub
restricts flow and
reduces accuracy.
Ours
EFD hubs provide
unrestricted flow and
produce accurate
consistent deposits.
Theirs
Ours
Burrs and flaws inside
reduce accuracy.
EFD tubing is
carefully polished
and burr-free.
A NORDSON COMPANY
QUALITY COSTS LESS.