Uniden DSS 2475 - Manual (Page 50)

[ 44 ]
Press and hold
/ ▲ or ▼
on the base to scroll
quickly through the
volume levels.
Adjusting the speaker volume level
When the base speaker is in use, press / ▲ or ▼ on the base to adjust the
volume. Press / ▲ for louder or / ▼ for softer.
The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.
Using the menu mode
The Menu mode allows you to set the following Answering System functions.
• To scroll through the menu options, repeatedly press
on the base in the standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.
• If you press , the operation is canceled.
• If the system remains idle for about 5 seconds after
the announcement, the system returns to standby.
Once
/SELECT or /SELECT is pressed, the
idle time is extended to 10 seconds.
• If there is an incoming call, the operation is canceled.
• When you have completed the setting, press
to
exit the menu mode, or to move to the
next menu option.
• You can also set these menus from the handset. See
“Answering System Setup” on page 19 for instructions.
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
For your convenience, voice prompts will guide you
through the menu setup mode.
UP308BH (DSS2465) ENG OM 12/28/04 8:26 AM Page 44