Uniden BCT15 - Manual (Page 76)

76
Programming Conventional Systems
[MENU] Program System
F
New System
F
Conventional
F
Confirm? Yes=”E” / No=”.” Press the desired key.
The scanner creates an empty conventional system with a default name of
System n C
. Note that “n” is a number that increments as you add new systems.
The C on the right side of the display indicates that this is a conventional system.
After creating the system:
1. Set system-level settings that apply to conventional systems in “Programming
System Settings.”
2. Create one or more channel groups with channels as described in
“Programming Channel Groups.”
Programming Trunked Radio Systems
[MENU] Program System
F
New System
F
Set CTCSS/DCS •
Set Modulation •
Set Attenuator •
Set Priority •
Set Alert • • • • •
Set Record • • • • •
Set Lockout • • • • •
Copy Channel • • • • •
Delete Channel • • • • •
New Channel • • • • •
Channel Settings CNV
MOT
EDCS
WIDE /
NARROW
LT
TYPE 1 TYPE 2