Searching band tips – Uniden BC355C User Manual
Page 35
Advertising
Searching Band Tips
If You Want to Do This - Here’s How -
Begin searching
Press the bAND key. The screen
displays the last known searched
band and then begins searching for
an active frequency in that band.
Continue after the
BCC has stopped on
an active channel
If the BCC stops on an active
channel that you do not want to
monitor but you do not want to lock
out, press the SEARCH key or the
UP/DOWN keys.
Stop searching
Press HOlD. The scanner stays on
the displayed channel until searching
is resumed. Press HOlD again to
resume searching.
Select a different band
to search
Press the BAND key multiple times to
search through the available bands.
Advertising