Uniden 6035 + 1 - Manual (Page 52)

51
Symptom Suggestion
The Caller ID does not
display.
The call was placed through a switchboard. •
Call your telephone provider to verify your Caller ID service is current. There may •
be a problem with your Caller ID service.
The handset doesn’t ring or
receive a page.
Make sure that you are not too far from the base. •
Make sure that your handset is registered to the base. •
Charge the battery in the handset for 15 to 20 hours. •
You cannot register the
handset at the base.
Charge the battery pack in the handset for 15 to 20 hours. •
Try resetting the handset (see Resetting the Handset on • page 48).
The handset doesn’t
communicate with other
handsets.
Make sure that you have registered all handsets to the same base, and all •
handsets are selecting the base (see page 21).
An extra handset can’t join
the conversation.
Make sure there are not two handsets already using the conference feature. •
Make sure that another handset is not in privacy mode. •
Make sure that you have registered both handsets to the same base, and both •
handsets are selecting the base (see page 21).
The answering system does
not work.
Make sure the base is plugged in. •
Make sure that the answering system is turned on. •
Make sure that the message record time is not set to announce only. •
Time stamp cannot be heard. Make sure you have set the time (see Setting the Day and Time on • page 40).
Messages are incomplete.
Incoming messages may be too long. Ask callers to leave a brief message. •
The memory may be full. Delete some or all of the saved messages. •
There is no sound on the
base or handset speaker
during call monitoring or
message review.
Adjust the speaker volume on the base or handset. •
Make sure the call screen feature is set to on. •
DECT6035, 6035+1 OM.indb 51 DECT6035, 6035+1 OM.indb 51 8/8/07 3:25:47 PM 8/8/07 3:25:47 PM