Univex TRAX353 - Manual (Page 89)

Page 89
How Do I Use It?
from the Trip Information screen by tapping .
The fields on this screen are continuously updated while you keep the
screen open.
You can switch between the trips, pause then resume them, or reset their
data.
You have the following functions on this screen:
Name Description
Pauses the trip currently shown on the screen. Values
on the screen stop changing.
This button replaces the previous one if it has been
activated. Tap it to resume collecting trip data.
Resets all counters of the currently shown trip.
Collecting trip data is restarted only when TRAX353
receives a position from the GPS.
,
Cycles through all trips.
Quick menu
The Quick menu is a selection of controls that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
.
If you tap any of the switches in the Quick menu except for the Vehicle type,
the Map screen immediately returns. A switch is on if its lamp is lit. The Vehicle
type button is different. It is a multi-value button. It opens a list of available
choices, and the symbol of the selected vehicle is shown on the button.