US Amps AX - Manual (Page 20)

Owners Manual
and
Installation
Guide
AX series
www.usamps.com
Limited Warranty:
U.S.Amps warrants all manufactured electronic products to be free from defects in material and workmanship for a
period not to exceed TWO YEARS from the date of purchase.
IMPORTANT WARRANTY NOTICE: U.S.Amps will only warrant and service products
displaying valid U.S.Amps serial numbers. WARRANTY SERVICE WILL ONLY BE
PERFORMED WHEN THE UNIT IS ACCOMPANIED BY A COPY OF THE ORIGINAL SALES
RECEIPT FROM AN AUTHORIZED DEALER. All product returned to U.S.Amps for service
MUST be accompanied by a Return Authorization Number, issued by U.S.Amps in
advance of shipment. The Return Authorization Number must be clearly and conspicu-
ously displayed on the shipping
carton or U.S.Amps will refuse delivery.
For Return Authorization Numbers, first call your U.S.Amps dealer you purchased the products from. The dealer will
help you to obtain Return Authorization Numbers.
This warranty extends only to the original purchaser and is not transferable. Defective equipment must be returned
within the warranty period, freight prepaid, to the U.S.Amps Factory or an Authorized U.S.Amps Warranty Station.
This warranty covers only detects in materials and workmanship of manufactured electronic products(amplifiers).
Incidents of misuse, abuse, neglect, or unauthorized modification will not be covered within the terms of this
warranty.
U.S.Amps reserves the right to refuse warranty service under such conditions.
U.S.AMPS WILL NOT BE RESPONSIBLE FOR ANY DAMAGES, WHETHER INCIDENTAL OR
CONSEQUENTIAL, RELATED TO THE USE OF THIS OR ANY OTHER PRODUCT BEARING OR
SOLD UNDER THE U.S.AMPS BRAND NAME. USE THIS PRODUCT AT YOUR OWN RISK.
IMPROPER USE OF THIS PRODUCT CAN RESULT IN PROPERTY DAMAGE, BODILY HARM,
AND OR OTHER DAMAGE. U.S.AMPS ASSUMES NO RESPONSIBILITY FOR YOUR HEALTH
OR SAFETY.
NEVER, NEVER, NEVER!
NEVER USE A U.S.AMP WITH A GROUND LOOP ISOLATOR ON THE RCA’S OR AN ISOLATED
INPUT SIGNAL.
U.S.Amps are input-isolated at the factory and require an input ground for proper operation.
NEVER INSTALL OR MOUNT YOUR AMPLIFIER DIRECTLY TO A SPEAKER ENCLOSURE OR
ANYWHERE ELSE WHERE SEVERE VIBRATION IS PRESENT.
Protect your investment. Use Common
sense. Make sure the spot you choose is well-ventilated and free from dirt and moisture.
NEVER USE YOUR U.S.AMP BELOW THE RATED MINIMUM IMPEDANCE. Remember, when you bridge
your amplifier, each channel “sees” one half of the load, hence at 4 ohms bridged each channel is operating at 2 ohms.
U.S.Amps makes the FAILURE TO OBSERVE THIS BASIC RULE WILL RESULT IN A SENSELESS WASTE OF POWER AND
PERFORMANCE, and could damage your amplifier.