Univex 6753i - Manual (Page 14)

8 Model 6753i RP Phone Installation Guide
Installation and Setup
Shared Network Connection
To connect a network device (such as a computer) to the phone, connect an
Ethernet Cable into the network port on the top of the phone marked with
PC . Plug the other end of the Ethernet cable into the network jack on the
network device you are sharing the network connection with.
Note: The PC jack on the 6753i RP does not supply inline power onto other network
devices. All Ethernet cables used must be minimum category 5/5e straight-
through cables, such as the cable provided with your phone.
Connecting to the Network and to Power
Power Adapter
Use the power adapter (provided by your System Administrator) with your
phone and plug your phone into a power source.
Inline Power Provided
If your network provides 802.3af compliant in-line power, the phone is
powered through the network.
1. On the top of your phone, connect the Ethernet cable (provided with
your phone) into the network port marked with LAN .
2. Plug the other end of the Ethernet Cable directly into the network jack
on the wall.
Inline Power Not Provided
If your network does not provide 802.3af compliant in-line power, you have to
Ethernet
Cables
Other Network Devices
Network Jack
(if Inline power provided,
do not install the power adapter)
Power
Adapter
To Network
To Other
Network Device
Power Adapter
Connection