Universal Electronics URC-2505 - Manual (Page 24)

Key Sequence
You can program your ONE FOR ALL 5 to issue a sequence of
commands at the press of a button. For example, you may
want to turn on your Satellite and TV at the same time then
set your TV to programme 5. Any sequence of commands you
regularly use can be reduced to one key stroke for your
convenience. You can install a sequence on any key, except
for the device keys (TV, VCR, SAT, CD and AUX), the
Magic key and the Scan key.
To set up the sequence mentioned above on the Blue Fastext
key of your ONE FOR ALL 5:
Press and hold down the
MAGIC key until the red light
blinks twice.
Press 995.
Then press the Blue Fastext key.
(This is the key to which the
sequence will be assigned.)
Next press SAT, POWER, TV,
POWER, 05 (Enter the
programme number exactly as you
would on your original remote.).
To end the sequence, press and
hold MAGIC until the ONE
FOR ALL 5's red light blinks
twice.
Whenever you press the Blue
Fastext key, the ONE FOR
ALL 5 will turn on your Satellite,
turn on your TV then set your TV
to programme 5.
To install any sequence, press:
MAGIC* + 995 + Key to which sequence will be assigned +
Sequence of commands + MAGIC*
*Here you must hold down MAGIC until the red light blinks
twice.
■ ■ ■ ■
■ ■ ■ ■
23
1
2
3
4
5
6
SAT
TV