Uniden DS72 - Manual (Page 26)

24
▼ Using the memory location features
1. Press talk on handset or speaker on the base Unit
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
1. Remove the handset from the base unit.
2. Press mem button twice.
3. Press the memory location (01-20) to be erased.
A tone indicates that the stored number is erased from memory.
On certain occasions after dialing a number, you may be requested by the party
or service you are calling to enter a special access code, such as when
performing a banking transaction. To store this number, refer to “Storing
Memory Dial Numbers” on page 22.
▼ From the Handset
For example, if your bank’s telephone number is stored in handset memory
location 3, and your account number is stored in handset memory location 4:
1. Press talk on the handset.
2. Press mem on the handset and number
●
3 on the handset keypad.
3. At the appropriate time, press mem and number
●
4 on the handset
keypad.
4. Your handset dials the number and you may proceed with your transaction.
▼ From the Base Unit
For example, if your bank’s telephone number is stored in base unit memory
location 3, and your account number is stored in handset memory location 4:
1. Press speaker on the base unit.
2. Press mem on the base unit and number
●
3 on the base unit keypad.
CHAIN DIALING
ERASING A STORED NUMBER FROM MEMORY
DIALING A NUMBER IN MEMORY