Uniden DA069 - Manual (Page 8)

SETTING THE ANSWER MACHINE TO ANSWER CALLS
To Turn the Answer Machine On
To turn on the Answer Machine and set it to answer calls and record messages, press once.
“Answer-on”, is announced, then beeps once and plays the outgoing message.
The red “Answer-on” indicator lights up. The Answer Machine is now set to answer calls
To Turn The Answer Machine Off
To turn off the Answer Machine press again.
“Answer off”, is announced, then beeps and the red “Answer-on” indicator turns off.
Screening Calls
To screen calls, let the Answer Machine answer them, then listen to the caller’s message
through the Answer Machine speaker. If you decide to answer the call, pick up any phone on
the same line and talk.
Playing Messages
If there are new messages, the red “answer on” indicator flashes, the number of flashes
equals the number of messages.
To play all the messages (old and new), press . The number of messages recorded is
announced, each message number and the day and time the message was recorded and
then plays the message.
Playing New Messages Only
To play only new messages, hold
down for 2 seconds.
(If there are no new messages stored,
the Answer Machine announces “You have no
new messages:”).
ans
on
ans
off
When a message is
being left, the
message is heard
through the
speaker. This
cannot be
turned off.
The Day and Time
will only be
announced if it
has been set. Refer
pg.3 for setting
instructions
delete
ogm 1
set
volume
answer
time
ans off
ans on
D IGIT AL A NSWERING
M ACHINE
DA069
Superb
Digital
Sound
Quality
delete
ogm 1
set
volume
answer
time
ans off
ans on
D IGIT AL A NSWERING
M ACHINE
DA069
Superb
Digital
Sound
Quality
4
DA069 V4 Qk 5/17/02 2:40 PM Page 8