UMAX Technologies Astra 3400 - Manual (Page 37)

Configuring the Custom Button Values
1. Click on the Custom icon to open the window that contains the variables you are adjusting.
NOTE: The Custom icon controls the values for both the E-mail and FAX and OCR (optical character
recognition) features. You configure the variables for each function separately.
To configure the values for the e-mail function:
1. If the E-mail icon is not selected (enclosed in a red box), click the E-mail icon.
2. Select the e-mail application (only Netscape and Eudora and Lotus cc:Mail are supported) to send the
scanned image to, by clicking on the arrow to the right of the Mail Destination field.
3. Select the type of image you are scanning by clicking on the arrow to the right of the Document Type
field and choosing one of the available document types from the drop-down menu.
4. Select the desired resolution by clicking on the arrow to the right of the Resolution field and choosing
one of the presets from the drop-down menu.
5. Select a scanning intensity level (brightness) by clicking on the arrow to the right of the Brightness
field and choosing the desired brightness level from the drop-down menu.
6. Original indicates the type of material the original image is printed on. Select either Reflective or
Transmissive by clicking the arrow to the right of the Original field.
7. Select the file size for the scanned image by clicking on the arrow to the right of the Scan Area field
and choosing the desired dimensions from the drop-down menu.
37