Uniden UH036SX - Manual (Page 9)

8
SCANNING
The scan function scans all channels and stops at an active
channel. When the signal stops, scanning resumes.
To initiate scanning,
1. Assuming the unit is on CH1
when switched on.
2. Press and hold Channel or
for 3 seconds and scanning
starts.
3. Press Channel or ;
or to cancel scanning.
PTT
If Channel or is pressed while the unit is
paused on a channel, scanning will be resumed.
TO OPERATE IN DUPLEX MODE
Eg. CH1 is being used in your area for
repeater use.
Press momentarily. The icon
appears.
Press again to deactivate the duplex
operation. will return to
normal operation.
UH036SX
dup
dup
mic
vol/
mon
ch/
scan
dup