Uniden ANA9320 User Manual
Page 36
xfer Key
Note: This feature is not available in PSTN mode.
hold Key
Press once and the call is placed on hold.
Press
L1, L2 or TALK to resume the call.
pause Key
Press once to cause a four second pause while dialing a number.
flash Key
Press once to cause a "Hook Flash" while on a call.
In standby mode, you can redial any one of the last three numbers
previously dialed.
ON/OFF MUTE Key
This key turns the handset MIC on or off while in TALK mode.
It toggles between on and off.
RING/VOL Key
This key selects the ringer volume level or tone (or silent alert)
during Standby mode, and handset earpiece audio level during a
call. This key also selects an item during programming mode.
CH Key
The ANA 9320 automatically selects the clearest of three
channels during a call for maximum audio quality. But, if you hear
static or noise during a call, press
CH to select a clear channel.
30
38
Y:...ANA9320 om.vp
Tue Dec 03 15:25:23 2002
Color profile: Disabled
Composite Default screen