Uniden DECT1725 - Manual (Page 27)

Settings menu
Tones
Flash
Changing the Flash time
You can switch on or off the tones for key touch,
battery low, and out-of-range alarm.
For example, when the key tone is set to ON, you
will hear a tone each time you press a keypad
button.
1 Press to access the main menu.
2 Press or to select .
Press .
3 Press or to select .
Press .
4 Press or to select the option you
want.
Press .
5 Press or to display either or .
Press to confirm.
Flash is used when connected to certain
switchboards, for transferring calls to another
extension number, and for some network services.
Contact your network or switchboard provider for
advice on how to use the button.
You can select the flash time from short or long
according to your switchboard requirements.
Consult your switchboard provider for advice if
unsure which setting you need.
1 Press to access the main menu.
2 Press or until is
displayed and press .
3 Press or to select and
press .
4 Press or to select or and
press .
HS SETTINGS
TONE SETUP
KEY TONE
BATTERY LOW
RANGE ALARM
ON OFF
BS SETTINGS
FLASH TIME
SHORT LONG
[26]
menu/ok
menu/ok
menu/ok menu/ok
menu/ok
cid
cid cid
cid
menu/ok
menu/ok
cid
rdl/f
menu/ok
cid
menu/ok