Uniden BT230 - Manual (Page 8)


Your phone should discover a device called a BT230 or BT230 headset, When your phone asks if
you want to pair with this device, select yes.
When your phone prompts you for a PIN code or password to pair with the BT20, enter
0000.
NOTE: If your phone supports Bluetooth 2.1, you do not need to enter a password.
When the headset is paired, the blue LED flashes twice every 5 seconds; your phone might also
display a confirmation message.
NOTE: If the blue LED flashes once every 5 seconds, the headset is not paired. Try the
pairing procedure again.
Connect to Your phone
Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset
off and back on. If the headset still won’t connect, check your phone’s owner’s manual for
additional Bluetooth information.
once the Headset is paired
Whenever you turn the headset on, it will automatically try to connect to whatever device it was
connected to last.
)
5)
)
►