UTStarcom VM8915 - Manual (Page 29)

In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the
second number.
SPEED DIAL
1 Press [MENU] .
2 To assign a phone number to a location, select
the location then press [ASSIGN].
3 Select the entry with the Navigation Key then
press [OK].
If a phone number is already assigned to the
location, press [ERASE] and [OK] to delete.
4 “Speed dial # number edited” will be displayed.
l
If the entry is set to secret, you will be asked for your
password. l
• “1 Key” is used for One-Touch voicemail dial feature.
• “Unassigned” appears if the location is available.
• If a phone number is set as Secret, you will have to enter
the password. (Refer to page 89 for password information.)
C
H
4
55
C
H
4
54
CONTACTS CONTACTS
MSG. GROUP
Allows the user to group up to 10 phone numbers. The user can add,
change, and delete Msg. group.
1
3
To add a new group, press [MENU] .
A maximum of five groups is allowed.
ADD NEW MSG. GROUP
Input a new group name.
4 Press [OK] to save it.
2 Press [OPTIONS] to select “Add group”.
CHANGE MSG. GROUP NAME
2 Select an existing group name with the
Navigation Key.
4 Input a new group name.
5 Press [OK] to save it.
3 Press [OPTIONS] to select “Rename”.
1 Press [MENU] .
To add a phone book entry to a Msg. group, select the Msg.
group, then press [OK].
Choose a location, then press [ASSIGN].
Then scroll to the phone book entry, then press [OK].
SETTING A SPEED DIAL THROUGH THE CONTACT LIST:
1. To access the “Find by name” or “Find by number” menu.
2. To scroll through the contact entry with the Navigation Key, then
press [OPTIONS] to select “Add speed dial #”,
3. To scroll through with the Navigation Key, select “Speed dial id” ,
then press .
4. “Speed dial # number edited” will be displayed.
Press [OPTIONS] to 1. Add Speed Dial#, 2. Erase or
3. Prepend.