Getting connected, Tv/montor – VocoPro CDG-X3P II User Manual
Page 8
Advertising
7
Getting connected
Connecting the CDG-X3P II to a Television/Monitor
1. Connect one end of the RCA cable to the VIDEO OUTPUT on the rear panel of the CDG-X3P II
2. Connect the other end of the RCA cable to the RCA video input on your Television Monitor.
NOTE: If your television does not have an RCA type connector you may use a VCR or an RF Modulator (not included) to
connect your monitor. (See “RF Connection”.)
TV/Monitor
RF Connection
VIDEO SYSTEM
VOLTAGE SELECT
ECHO
NTSC
SWITCH TO
NTSC FOR U.S. TV SYSTEM
PAL FOR EUROPE TV SYSTEM
PAL
110-120V
220-240V
TREBLE
MIC 1-2 CONT
BASS
DJ MIC VOL
DJ MIC
ECHO BYPASS
TV/MONTOR
Advertising