Vinotemp VT-50SBW - Manual (Page 8)

8
1 7 6 2 1 S o u t h S u s a n n a R o a d ,
R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m - F a x 3 1 0 . 8 8 6 . 3 3 1 0
8 0 0 . 7 7 7 . 8 4 6 6
TEMPERATURE CONTROL
Important note: In order to operate efficiently, thermoelectric products
should be in an environment with an ambient temperature of less than
90°F (32°C).
Setting the temperature control (presets):
For your convenience, The Wine cellar is programmed at storing temperature.
The temperature pre-set by the manufacturer is 54
o F (12 o C). The indicator
shows the temperature of 54 o F (12 o C).To change the preset temperature in the
wine cellar, simply press the Preset button until the desired number appears.
The following sections about storing and serving wines will advise the optimal
temperature for your wine.
Setting the temperature control (manually);
You can manually adjust the temperature. Simply press the (-) button on the
control panel to decrease the temperature and the (+) button to increase the
temperature inside the wine cellar. The temperature range is from 45°F (7°C)
to 65°F (18°C).
The electronic control and digital display provide an attractive method to
control temperature. The upper zone will be approximately 8-9
°F (4.4-5 o C)
warmer and the lower zone will be approximately 8-9°F (4.4-5 o C) cooler than
the middle section. The fluctuation of temperature display is normal, fluctuation
range is about -5
o F~5°F (-2.8 o C~2.8 o C).