VIEWSONIC DPG807 - Manual

Connect the stand to the back of
the photo frame by aligning with
the notches and turning counter
clockwise until the stand is vertical.
Adjust the viewing angle by
sliding the stand up or down.
Connect the supplied power
adapter to the photo frame and to
an electrical outlet.
Slide the power switch on the
back of the photo frame to the
“ON” position.
Insert your memory card into the 4-in-1 card
slot with the metallic contacts facing toward the
display screen.
Insert the Compact Flash (CF) memory card into
the CF card slot with the arrow on top and into
the pinholes pointing toward the CF opening slot.
Insert your USB flash drive into the USB
Host slot with the inner metallic contacts
facing toward the display screen.
If there are photos in the memory card or
USB flash drive, your photo frame will
automatically display them in a slideshow.
DPG807
Activate the touch screen OSD by touching the blue backlight in the active touch screen
area. (Please note that the OSD timeout defaults to 20 seconds and can be adjusted in the
SETUP menu.)
1
Tap the Menu [M] button on the active touch screen
to access the main menu.
Tap the Left [<] or Right [>] button to highlight a
menu item. The highlighted icon pops up with
a description. Tap the Play/Confirm [►] button to
select the highlighted media source.
Select Viewing Mode
Insert Memory Cards and USB Flash Drive
Connect a Stand and Power Cable
Active touch screen area. Use gentle tap.
1 2
3
3 4
3
2
2 1