VIEWSONIC VS11769-2M - Manual (Page 41)

36
ENGLISH
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic N2635w
Using the TV Features
Annotations for OSD Menu Items
See below for meanings of the control items in each menu.
Video menu
•
Picture Mode: To select picture mode.
• Noise Reduction: To reduce the noise level of connected
equipment.
• Brightness: To adjust luminance of video.
•
Contrast: To adjust contrast of video.
• Color: To adjust color.
• Tint: To adjust tint level.
• Sharpness: To adjust picture sharpness.
• Back Light: To brighten or darken the backlight.
•
Color Temperature: To select color temperature.
• Auto Adjust: To auto adjust picture’s horizontal
position, vertical position, fine tune and H-Size. (only
enabled in VGA source)
•
VGA: To fine tune the image. (only enabled in VGA
source)
＊
H. Position: To adjust the horizontal position of the
picture.
＊
V. Position: To adjust the vertical position of the
picture.
＊
Phase: To adjust delay time of phase in order to
reduce the noise of picture.
＊
Clock: To adjust delay time of clock in order to
reduce the noise of picture.
Audio menu
• Balance: To adjust left and right audio balance.
•
Bass: To adjust bass.
• Treble: To adjust the treble.
•
Surround: To select concert hall effect “On” or “Off”.
• Reverb: To select the reverb sound effect.
•
Equalizer: To select equalizer modes.
• SPDIF Type: To select audio for SPDIF out.
• Auto Volume control: To turn On or Off Auto volume
control.
• Audio Only: To turn off the screen picture but keep the
sound on.
TV menu
•
Tuner Mode: To select TV source. Select “Cable” to
watch cable TV channels, and select “Air” to watch air
TV channels.
• Auto Scan: To auto scan TV and DTV channels.
• Channel Skip: To skip channels.
•
MTS: To select audio mode.
• Audio Language: To select available audio language.