VIORE LED22VF50 - Manual (Page 15)

OPERATION
-14-
1). Air/Cable: select Air TV signal and cable TV signal.
2). Auto Scan: If it's the first time you use the TV, you
should scan all the TV channels first,
press the button to confirm, you will see below
menu :
select“yes”item and press the ENTER button to
confirm, you will see below menu which indicates
auto search is in process.
3). Favorite: Press button to choose/delete the
favorite channel .
4). Show/Hide: Press button to display or hide
currently channel.
5). Channel NO . :Display the currently channel number.
6). Channel lable: Press button to edit currently
channel name.
7). DTV signal: Display DTV signal intension. It can't be
selected and adjusted.
Transparency 25%
Menu Language English
Select Adjust Menu Exit
< >
< >
3.5 VGA Settings: In PC Mode is available.
1).H-Pos:Adjust the horizontal position of the screen.
2).V-Pos:Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
5).Auto: Auto adjust to fit the screen.
Press button to select VGA Settings ,Press
button, the screen will display as follow:
Select Adjust Menu Exit
H-pos
V-pos
Clock
Phase
50
Auto
50
50
50
>
4. Channel MENU
The fourth item of the MENU is Channel MENU.
You can adjust digital and analoge TV Channel .
Press to select, press to adjust.
Select Adjust Menu Exit
Air/cable
Auto Scan
Air
Favorite
Show/Hide
Channel NO.
Channel Lable.
DTV signal: Good
2-1
< >
< >
>
>
>
>
Select Adjust Menu Exit
Are you sure?
NO YES
Press“ENTER”Key To Select
Select Adjust Menu Exit
R F CH: 4
Found: 4
Analog: 1
Digital: 3
3.4 Menu Settings
You can adjust Menu Settings here.
Press to select, press to adjust, press MENU
to exit.