VIPowER VP-9059 User Manual
Page 15
VP-9059 USER MANUAL
15
Step3:
If FDISK quits without any message, go back to the Windows 98
screen, disconnect the external Hard Disk and re-boot the
computer. Reconnect the external HDD and go back to Step 1 to
proceed.
Step4:
For the first screen of FDISK, answer the question:
Do you want to enable large disk support?
[Y] if you want to build a partition larger than 2GB.
[N] if you want to build a partition small than 2GB.
Step5:
The next screen is [FDISK OPTIONS]. Type [5] to select the disk.
Important:
You must type [5] in this screen to change the current fixed
disk drive to build a partition. The default fixed drive set by
FDISK is your internal hard disk drive.
WARNING!!
If you don’t change the fixed disk drive to the
external Hard Disk, the data of your internal
hard disk will be destroyed!