Verilux 571391 - Manual (Page 9)

9
Bulb Removal and Replacement — continued
Re-installing Bulb and Plastic Diffuser
1. Insert bulb into lamp by fi rmly holding bulb base and pushing down until
you hear a “snap” to seat properly.
2. Re-install the bracket using the screws (E) you previously removed.
3. To attach the plastic diffuser to the lamp body,
loosely insert Tab A into Slot A.
4. Insert one diffuser corner at a time.
5. Work one diffuser corner into the side track and
slide gently down into place into bottom track.
6. Snap side tab into place (side slot). Entire side of
lens should be seated into the track.
7. Repeat for other side of diffuser. Note alignment
of diffuser corner into side track.
8. Firmly push diffuser down until Tab A snaps into place.
Align top of diffuser in top track as necessary.
Slot A
Tab A
6LGH6ORW
6LGH7DE
7RS7UDFN
6LGH7UDFN
%RWWRP
7UDFN
7DE$
'LIIXVHU
&RUQHU
%RWWRP
7UDFN
Tab A