Volvo 1992 240 User Manual
Page 72
1992 Volvo 240
Driver seat height
There are two levers, each with three positions, for adjusting the height of the seat (front and/or back of
cushion).
This allows adjustment of the seat cushion angle for added comfort.
After adjusting the seat check that it is securely latched.
Note: Do not attempt to raise seat height while
seated.
Horizontal seat adjustment
Pull control upward, then slide seat forward or rearward to desired potion.
Make sure that the seat is properly secured when you release the control.
Warning: For your safety, never adjust seat while driving. The seat should be adjusted so that the brake
(and clutch) pedal can be depressed fully.
Passenger seat height
The front passenger seat is retained by four brackets. There are two height positions at the front and
three at the rear. However, this adjustment must be accomplished manually, using appropriate hand
tools.
Seat back inclination
Rotate control clockwise to tilt seat back rearward.
Rotate counterclockwise to tilt seat back forward.
Note: Body weight must be shifted to allow seat back to move forward or
rearward.
file:///K|/ownersdocs/1992/1992_240/92240_049.htm (6 of 7)12/30/2006 9:31:27 AM