Vivitar vivtarr i7 User Manual
Page 23
23
USING THE CAMERA
When powering the camera ON for the first time the camera will take you through
the INITIAL CAMERA SETUP.
Setting the Camera Language
1) You will first be prompted to select a language for the camera. The Language
selection menu will appear. Select the language of your choice by pressing the
UP and DOWN direction control buttons. Then press the SET button to confirm
the selection.
2) After selecting a language, you will be asked if you would like to continue with
the initial camera setup. A message will appear: “Continue with Camera Setup?”
Select “Yes” to continue or “No” to exit the setup.
NOTE: If you select “No” and decide to leave the camera setup, the camera will be set
to its default settings. These settings can be adjusted at any time manually through
the menus in the camera.