Assembly 7 – Volkswagen NEW BEETLE P5921 User Manual

Page 9

Advertising
background image

H3428pr-0720

5

• Insert a #10 x ¾" trusshead screw through the front end of the

vehicle and through the hole in the bracket.

• Attach the #10 lock nut to the end of the trusshead screw.

• While holding the lock nut in place with an adjustable wrench,

tighten the screw.

#10 x ¾"

Trusshead Screw

#10 Lock Nut

Screw

Lock Nut

Steering

Wheel Cap

Steering

Wheel

6

DASH VIEW

• Turn the vehicle upright.

• Fit the steering wheel cap into the center of the steering wheel.

• Insert two #6 x 1" screws through the steering wheel cap and

into the steering wheel. Tighten the screws.

P5921pr-0920

9

ASSEMBLY

7

• Insert the seat front tabs into the slots inside the vehicle.
• Then, insert the lock fastener tabs on the back of the seat into the

slots in the vehicle.

• Using a slotted screwdriver, turn each lock fastener a 1/4 turn to

the locked

position.

IMPORTANT! Remember to keep the lock fasteners locked

at all times to prevent children from accessing the vehicle

battery compartment.

Unlocked

Locked

Seat

Lock Fastener Tabs

REAR VIEW

Hubcap

Hubcap Cover

Slots

Tab

Tab

Tab

Tab

SIDE VIEW

8

• Turn the vehicle upright (or keep it on its side).
• Insert one of the tabs on the hubcap cover into a slot in

the hubcap.

• Then, push with your fingernail (or carefully with a slotted

screwdriver), the other two hubcap cover tabs into the slots in

the hubcap.

• Repeat this assembly step to attach the other three

hubcap covers.

Advertising