VIPowER USB 2.0 - Manual (Page 10)

VP-6228(T) USER MANUAL 10
b) Attach the IDE 40-pin data cable from the rear panel of the
bottom cover to the 40-pin connector on the back of the 5.25 “
device or Mobile Rack. To ensure pin-1 to pin-1 connection, orient
the cable so the colored stripe edge is closest to the power
connector.
c) Attach the 4-pin power cable from the rear panel of the bottom
cover to the 4-pin connector on the back of the 5.25” device or
Mobile Rack. The connector is “D” shaped to ensure proper
connection.
(Place one 5.25” IDE Device in the bottom enclosure cover)
IDE 40-pin Data Cable
on the rear panel
of the bottom cover
One 5.25” Device
or
one MobileRACK
4-pin Power
Connectors
4-pin Power Cable
on the rear panel
of the bottom cover
40-pin IDE Data
Connectors