Vax X3 User Manual

Page 12

Advertising
background image

11

D

IR

T
C

O

N

T

A

IN

E

R

A

N

D
F

IL

T

E

R

CLEANING YOUR LIFETIME HEPA FILTER (CONTINUED)

REPLACE FOAM FILTER

3.

Twist filter handle to the left and

pull out of lid.

4.

Hold filter under running water to wash.

Ring excess water out of filter. Allow

filter to dry for at least 24 hours.

5.

Place filter under water to clean. Make

sure filter is completely dry before

returning to cleaner.

2.

Return filter to the dirt container

lid.

REPLACE PLEATED FILTER

1.

Replace filter inside filter cup by

aligning with tabs inside of filter

cup.Twist to the right until filter

locks in place.

Place filter lid on top of dirt container and

align arrows (Diagram 3). Push down gently

and twist filter cup to the right until lid is

secure and snaps in place (Diagram 3a).

3.

3a.

NOTE:

Let filter dry for at

least 24 hours before placing

back in cleaner.

VAX Tip:
For your convenience while

your lifetime HEPA filter is

drying, pick up an additional

filter at a retailer near you or

online at www.vaxusa.com.

Advertising