Vivotek FD7131 User Manual
Page 99
- 98 -
www.vivotek.com
T:
886-2-82455282
F:
886-2-82455532
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER
VALUE
DESCRIPTION
addallow
Add a set of allow IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting
from index position.
adddeny
Add a set of deny IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting
from index position.
deleteallow
Remove a set of allow IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
Method
deletedeny
Remove a set of deny IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
start
<ip address>
The start IP address to add or to delete.
end
<ip address>
The end IP address to add or to delete.
index
<value>
The start position to add or to delete.
return
<return page>
Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according the the