VBrick Systems StreamPlayer v4.4 - Manual (Page 11)

StreamPlayer User Guide 5
Chapter 3
Record
Recording a Stream
StreamPlayer Plus only
.
Recording from VBricks using StreamPlayer Plus software may be
done in a number of different modes with various protection schemes. The recording might
consist of a single large file or a series of smaller, or batch, files. Batch files may be set up so
that recent files overwrite earlier ones. Live streams might have the ability to record them
suppressed or allowed through a password. The recorded stream can be the current stream
being viewed or a different one. StreamPlayer can also record password-protected streams if
you know the password. When attempting to record a stream that has been password
protected, you will be prompted to enter the configured password. There are circumstances
where you will not be able to record streams. For example, recording is not permitted when
the application is unlicensed and running in demo mode. Recording can also be restricted or
entirely disabled by an administrator. Note that Recording and Edit/FTP are currently
supported for MPEG-1 and MPEG-2.
T
To record a stream:
1. Highlight the program to record in the Program Information pane.
2. Select the StreamPlayer Plus
Record
button.
T To save a stream:
1. Enter the name of the file to be saved or browse to the location. The default is
C:\Program Files\VBrick\StreamPlayer Plus\Video\"programinfoname".mpg.