VTech LITTLE SMART - Manual (Page 5)

4
BATTERY INSTALLATION
1. Make sure the unit is Off.
2. Locate the battery cover on the
back of the unit. Use a coin or
screwdriver to loosen the screw.
3. Install 2 'AA' (UM-3/LR6) batteries,
follow the diagram inside the
battery box. (The use of new,
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.