Vizio E420VP - Manual (Page 30)

22
5
E370VP / E420VP
Changing the Parental Control Passcode
If you use the parental controls, you should change the passcode to prevent
children from accessing inappropriate material.
1. From the Parental Controls menu, highlight Change PIN and press OK. The
Change PIN menu is displayed.
2. In the New Pin field, use the Number Pad on the remote to enter your new
4-digit parental control passcode.
3. In the Confirm Pin field, use the Number Pad on the remote to re-enter
your new 4-digit parental control passcode.
4. Write down your new parental control passcode and save it in a secure
location.
5. Press the EXIT button on the remote.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
1. From the Parental Controls menu, highlight RESET LOCKS and press OK.
The TV displays, “Are you sure you want to RESET ALL LOCKS SETTINGS
to the factory defaults?”
2. Highlight Yes and press OK.
Changing the Names of the Inputs
To make it easier to recognize the different devices attached to the inputs on your
TV, you can rename the inputs. For example, if you have a DVD player connected
to the Component input, you can rename that input to display “DVD Player”.
To change the name of an input:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the Settings icon and
press OK. The TV Settings menu is
displayed.
3. Use the Arrow buttons on the remote
to highlight Name Input and press OK.
The Name Input menu is displayed.
4. Highlight Input Source and press OK.
Highlight the input you want to rename
and press
OK.
5. If you would like to use a preset input
label, highlight Input Labels and press
OK. Highlight the input label you want
to use and press
OK.
If you would like to name the input
yourself, highlight the field below Input
Labels and enter your custom label
using the on-screen keyboard and
press
OK. (If you would like to use the
on-screen keyboard instead, highlight
Show Keyboard and press OK.)
6. When you have finished naming your input, press the EXIT button on the
remote.