VIORE LED24VF60 - Manual (Page 21)

19
6. Channel menu
OSD Menu
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label
and DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
ƾ If you select “Cable” as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use
Ģ button to highlight the “Start to Scan”, then press !
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
ƾ If you select “Air” as input signal in Antenna item, you
can press ! button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC
mode, please wait patiently.
Favorite: Allow you to add these channels which you desired as the favorite channels.
Use ġ  Ģ button to highlight the desired item, then press
OK button to add or remove the highlighted channel as
favorite.
Description