Venturer KLV39082 - Manual (Page 16)

- 15 -
SETTING THE CLOCK
To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is
plugged in, but not turned on.
• Check that the rated voltage of the unit matches your local voltage.
4. Press the / buttons to set the current
minutes then press the SET CLOCK button
once to start the clock.
1. When the AC power cord is plugged in, the clock
display will blink.
SETTING THE COOKING TIMER
1. Press the TIMER button. The “TIMER” indicator
appears and the cooking time “10” blinks.
2. Press the / buttons to select your
desired time from 1-99 minutes.
• Press the TIMER button repeatedly to select
time: 10, 15, 30, 45, 60, 75, 90 minutes.
• Press and hold the / buttons to fast
forward/reverse the cooking time.
4. To turn OFF the ALARM, press the TIMER
button once. Otherwise, the ALARM will
automatically turn off after 60 minutes if no button
is pressed.
CANCELLING THE COOKING TIMER
• Press the TIMER button until the time of the cooking timer shows " OFF ". The “TIMER” indicator will
disappear.
3. When the preset time elapses, the ALARM will
sound.
3. Press the / buttons to set the current
hours then press the SET CLOCK button once
to confirm. Then, the MINUTE blinks.
2. Press the SET CLOCK button until the HOUR
blinks.