Vivitar ViviCam 8300s - Manual (Page 46)

Digital Camera >>
EN-46
[ ] PLAYBACK MODE
Playing Back Still Images
You can play back the still images on the LCD monitor. Insert the SD card into the
ViviCam 8300s and turn on the power before starting.
1. Slide the mode switch to [ ].
The last image appears on the screen.
2. The images can be fed in reverse or fed forward
with the W /X buttons.
Image Display Information
You can switch the state of the information display
by pressing the
button when playing back images.
Each press of the button switches the information
display state in the following order:
Pressing the S/T buttons during image playback will rotate the
image 90 degrees. The T button rotates the image clockwise,
whereas the S button rotates the image counterclockwise. A press
of the button opposite to the direction in which the image was
rotated will return the image to the normal display.
A [
] icon is displayed with the video data. Video clips cannot be rotated.
A [ ] icon is displayed with images which have an audio memo recorded.
Press the SET button to play back voice memos.
In zoom playback, the display is switched between normal and non-display.
1853KB 01/01/2005 10:10