VocoPro DA-3600Pro2 - Manual (Page 14)

Rear Panel Descriptions
12
7. MIC OUTPUT jacks – These jacks export MIC 1, 2 and 3 OUTPUT only, bypassing the source audio signal in
order to provide connection to vocal effects units. Connect a paired RCA-ended patch cable from these jacks to
appropriate INPUT jacks on the vocal effects unit.
NOTE: MIC OUTPUT from these jacks is dry. Pro-Echo and Echo effects will not be applied to this MIC
OUTPUT, regardless of the master and channel echo settings in place.
8. REC OUTPUT jacks – These jacks provide connection to recording and other external audio devices.
Connect a paired RCA-ended patch cable from these jacks to appropriate INPUT jacks on the recording or
other audio/video device.
9. LINE OUTPUT jacks – These jacks provide connection to external audio/video devices. Connect a paired
RCA-ended patch cable from these jacks to appropriate INPUT jacks on the external audio/video device.
10. DVD AUDIO INPUT jacks – Connect a paired RCA-ended patch cable from these jacks to the AUDIO OUT
jacks on the device connected to the DVD channel.
11. CDG AUDIO INPUT jacks – Connect a paired RCA-ended patch cable from these jacks to the AUDIO OUT
jacks on the device connected to the CDG channel.
12. EFFECT LOOP jacks – Use these loops jacks to connect an external effects unit, such as a key controller or
EQ. After removing the LOOP-BARS, connect a patch cable from the OUTPUT jacks of your external effects
unit to the EFFECT LOOP IN jacks. Connect a second patch cable from the INPUT jacks of your external
effects unit to the EFFECT LOOP OUT jacks on the DA-3600 Pro.
NOTE: Do not discard the loop-bars. It is necessary for the loop-bars to be in place when there is no external
effects unit being used.
8 9 10 11 12 7
VIDEO OUT VIDEO IN
OUT
MIC REC LINE DVD CDG OUT
EFFECT
IN
L
INPUT OUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL NO.
NOTE: DO NOT CONNECT MORE THAN
ONE SPEAKER PER SPEAKER JACK
SPEAKER SYSTEM
CAUTION:
TO REDUCE THE RISK OF FIRE
REPLACE WITH ONLY THE SAME
TYPE AND RATING OF FUSE.
ATTENTION:
UTILISER UN FUBIBLE DE
RECHANGE DE MEME TYPE.
WWW.VOCOPRO.COM
LA VERNE CALIFORNIA
U.S.A.
AC IN
110-120V
220-240V
50/60Hz
110-120V 220-240V
voltage selector
SERIAL NO.
MADE IN CHINA
20010-9300-0
WARNING: TO AVOID ELECTRIC SHOCK PLEASE DON'T OPEN THE CABINET.
ANY PART WITHIN THIS MACHINE, CAN'T BE REPAIRED BYE CUSTOMERS
THEMSELVES, PLEASE SUBMIT TO EXPERT FOR REPAIRS.
CDG DVD
QA:3
PASS
R
L + -
R + -