VocoPro DA-900 - Manual (Page 9)

Getting Connected cont...
8
LINE OUT (1): This OUTPUT is for connecting the DA-900 to a secondary mixer or recording device. NOTE: Output from these jacks is NOT affected by
the MASTER VOLUME CONTROL.
(a) Using an RCA-type patch cable, connect the plugs from one side to the LINE OUT jacks on the DA-900 and the connect the other sides plugs to the
external device's AUDIO INPUT jacks.
MUSIC OUT (1): This OUTPUT is for connecting SOURCE PLAYER output exclusively to a recording device, secondary mixer, effects or other device.
(a) Using an RCA-type patch cable, connect one side to the MUSIC-OUT jacks on the DA-900 and connect the other sides plugs to the recorder's,
mixer's, effects unit's or other device's AUDIO INPUT jacks.
MIC OUT (2) : These OUTPUTS are for connecting the DA-900's microphone output to a recording device, secondary mixer, effects or other device.
(a) Using an RCA-type patch cable, connect one side to either of the MIC-OUT jacks on the DA-900 and connect the other sides plugs to the recorder's,
mixer's, effects unit's or other device's AUDIO INPUT jacks.
Line Out
Mic Out
Music Out
MIC ONLY INPUT MIXED
CDG DVD ONLY
MUSIC
LINE PRE
OUTPUT OUTPUT OUT INPUT
MIC ONLY INPUT MIXED
CDG DVD ONLY
MUSIC
LINE PRE
OUTPUT OUTPUT OUT INPUT
MIC ONLY INPUT MIXED
CDG DVD ONLY
MUSIC
LINE PRE
OUTPUT OUTPUT OUT INPUT
RECORDER
To Audio In
MIXER
To Audio In
To Audio In
RECORDER
STAGE
MONITOR 1
STAGE
MONITOR 2