Vizio WT-870 - Manual (Page 5)

OPERATIONS
(3) Adjust the volume control of the module of which reception indicator lights.
(2) Set the wireless microphone's power switch to ON. The
corresponding module's reception indicator lights. Out
of two reception indicators for antenna A and B, one
corresponding to the antenna receiving the strongest
radio signal lights.
(1) Switch the power on.
The power indicator lights.
Note on level indicator
The level indicator lights depending on the intensity of input into the wireless microphone, regardless of the
volume control setting. When the indicator lights red frequently, your voice can be distorted at a microphone
circuit. In such cases, move your mouth away from the microphone so that the indicator lights yellow at a
maximum level. This is not needed if the indicator lights red only occasionally.
If the microphone is equipped with a sensitivity control, adjust the control so that the level indicator lights yellow
when spoken loud.
CONNECTIONS
When using with the mixing console, connect the output of WT-870 to XLR-type input connectors of
the the mixing console.
YW-600 : Direct mount type to the tuner. Requires no antenna cable.
YW-610 : Mobile type antenna. Antenna cable must be under 10m (33 feet)
in length.
YW-620 : Fixed mount type antenna having a built-in booster amplifier.
Wireless microphones can be used in wide ranges.
Mixer, etc.
DC IN Connector
E
COLD
HOT
AC IN
Wall-mount dipole
wireless antenna
YW-620 Mobile wireless
antenna
YW-610
Whip wireless
antenna
YW-600
Wall-mount dipole
wireless antenna
YW-620
Mobile wireless
antenna
YW-610
Whip wireless
antenna
YW-600
– 5 –