Before using, Features & benefits: how to – Villaware NDVLCD0000 User Manual

Page 4

Advertising
background image

villaware.com

villaware.com

villaware.com

villaware.com

Before Using:

When unpacking the product, remove any

packing material, and any promotional labels

or stickers from your Coffeemaker. Be sure

all parts (listed under “Features”) of your

new appliance have been included before

discarding any packaging materials. you may

want to keep the box and packing materials

for use at a later date.
make sure your first cup of coffee is as

good as can be by cleaning your VillaWare™

Coffeemaker before its first use. Just follow

these simple steps:

1

Wash the decanter, decanter lid and the

filter basket in a mixture of mild detergent

and water. Rinse each thoroughly (please

refer to the “Features” diagram).

2

Replace all the parts and close the lid.

Then, run a brew cycle with water only,

without adding coffee and coffee filter.

3

When brewing is complete, turn your

coffeemaker off, discard the water in the

decanter and rinse the decanter, decanter

lid, and filter basket.

your coffeemaker is now ready to use. Enjoy

it! Be sure to read the “Care & Cleaning”

section of this manual to learn the correct

methods for cleaning.

Control Panel

a

Clock

Clock

b

mIN.

mIN.

c

hR

hR

(hour)

(hour)

d

SET DELAy

SET DELAy

e

SELECT

SELECT

/Off

/Off

CLEAN

CLEAN

LED (Red)

LED (Red)

DELAy BREW

DELAy BREW

LED (Amber)

LED (Amber)

BREW NOW

BREW NOW

LED (Green)

LED (Green)

Your new VillaWare

Coffeemaker

has the following features

BreWing CaPaCitY

BreWing CaPaCitY

– 12 Cups

remoVaBle Filter Basket

remoVaBle Filter Basket

– The filter

basket lifts out for fast and easy cleaning

and filling.

Pause ‘n serVe

Pause ‘n serVe

– Can’t wait for the

coffee to finish brewing? The Pause

‘n Serve feature allows you up to 30

seconds to pour a cup of coffee while

the coffeemaker is still brewing. Carefully

remove the decanter and the Pause

’n Serve feature will be automatically

activated, temporarily stopping the flow

of coffee into the decanter.

Water WindoW

Water WindoW

– Show amount of

water in the reservoir for accurate filling.

non-stiCk Warming Plate

non-stiCk Warming Plate

– This

feature allows you to keep your coffee

hot after brewing. The non-stick attribute

Features & Benefits:

how To:

prevents the decanter from sticking to the

surface of the warming plate.

Cord storage

Cord storage

– Safely stores excess

cord to keep your countertop neat.

tWo-Hour auto sHut-oFF

tWo-Hour auto sHut-oFF

– keeps

your coffee hot for two hours, then

automatically shuts off.

ProgrammaBle Controls

ProgrammaBle Controls

CloCk

CloCk

– The clock serves as a handy

kitchen clock and allows you to set the

Delay Brew feature.

delaY BreW

delaY BreW

– Would you like to wake

up to a fresh pot of coffee? The timer

allows you to preset when you would

like the coffeemaker to automatically

begin brewing your coffee, up to 24

hours in advance.

sPeCial Cleaning CYCle

sPeCial Cleaning CYCle

– Enables

you to easily maintain and clean mineral

deposits from your coffeemaker.

note:

If you have selected any of the

operating functions, the coffeemaker will act

upon the last operation selected if the power

is restored within 10 seconds after a power

outage.

set the Clock

1

Plug the power cord into a standard

electrical outlet. The clock will flash on

the control panel to indicate that the

time has not been set yet.

2

Press and hold the hR

(c)

and mIN

(b)

buttons until you reach the current time.

The Am or Pm indicator will light at the

bottom of the display.

The clock is now set!

note:

Pressing any button before setting the

clock will cause the clock to start keeping

time from 06:00 am. you must set the clock if

you want to use the DELAy BREW feature.

set the delay Brew time

While the display is in the clock mode, simply

press the SET DELAy

(d)

button and while the

DELAy BREW time is flashing, set the brew

time by pressing the hR and mIN buttons.

The Am or Pm indicator will light at the

bottom of the clock display.

Within a few seconds, the display will change

to the current time.
The Delay Brew Time is now set!

note:

To activate the DELAy BREW cycle,

see the “Brewing Coffee Later” section.
To check the programmed time, push the SET

DELAy button. The display will show the time

you have programmed the coffee to brew. If

you press the SET DELAy button again, or wait

a few seconds, the display will switch back.

4

5

b

a

c

d

e

d

Advertising