Vizio VHT510 - Manual (Page 4)

5 4
3
cONNEcT EqUIPMENT
(cONTINUED)
cONNEcTINg AN IPOD DOck (NOT INcLUDED)
L R
1. Turn off power to the Soundbar and the MP3 Player.
2. Connect one end of the audio cable to the analog
audio output on the MP3 player docking unit.
3. Connect the other end of the audio cable (white and
red connectors) to the IN jacks on the Soundbar.
4. Turn on the power to the Soundbar and MP3 Player.
5. Select the associated input by pressing INPUT on
the top of the Soundbar or pressing IN on the remote
control.
NOTES:
• Most MP3 players commonly use a 1/8” Stereo Mini-Jack. In
this case, use a 1/8” stereo mini-jack-to- RCA (AV) cable (sold
separately).
• Refer to your MP3 Player user manual for more information
about the audio output settings and connections of the product.
CAUTION: Do not connect the MP3 Player headphone output directly
to the Soundbar. This can result in damage to the devices.
4
cONNEcT POWER - SOUNDBAR
1. Connect one end of the AC adapter
into the 24V DC jack on the back of
the Soundbar.
2. Plug the other end into a wall outlet.
6
cONNEcTINg REAR SPEAkERS TO THE SUBWOOFER
1. Choose a location for your satellite speakers.
2. Connect the cable from the left satellite speaker to the left connector on the back of the subwoofer.
3. Connect the cable from the right satellite speaker to the right connector on the back of the subwoofer.
NOTES: For best results, place the satellite speakers behind the primary listening position. If it is desired to put all the
speakers in the front of the room, the front facing mode should be selected on the soundbar. Any length speaker wires
can be used. Refer to the User Manual to add longer speaker wire.
5
cONNEcT POWER - SUBWOOFER
1. Connect one end of the AC adapter into the 100-240V AC
jack on the back of the Subwoofer
2. Plug the other end into a wall outlet.
3. Turn the Power Switch to ON.
Left satellite speaker
Cable Cable
Right satellite speaker Subwoofer