Vantec EZ-SWAP 2 MRK-300FD-BK User Manual
Page 9
Advertising
Aluminum Mobile Rack
3-9
Install the Drive in Drive Case
Colored Stripe
Mounting
Screws
Data Cable
Power Cable
Mounting
Screws
7. Slide the drive case cover back on and secure with the two mounting screws.
5. Carefully position the drive inside the drive case.
6. Secure the drive in place using the supplied mounting screws. Use the mounting
holes on the sides or bottom, depending on the design of the drive.
Mobile Rack Drive Case Ready for Use
Mounting
Screws (x2)
Advertising