Vidikron VL-26HD User Manual
Page 19
Vidikron VL-26/VL-32 Owner’s Operating Manual
9
1.
OFF / ON
Use these buttons to turn the DView on or off.
2.
Numeric Buttons
Use these buttons to enter TV channel numbers or menu pass codes. Use the 100 button
to enter channel numbers above 99. Use the
-
button to enter DTV sub-channel
numbers.
3.
TIMER OFF Button
Press this button to set the sleep timer. Press it repeatedly to scroll through the available
options (Off, 10, 30, 60, 120 or 180 minutes).
4.
Source Selection Buttons:
INPUT 1
Press this button to switch to Input 1.
INPUT 2
Press this button to switch to Input 2.
INPUT 3
Press this button to switch to Input 3.
DVI
Press this button to switch to the Digital Video input.
RGB HD
Press this button to switch to the RGB HD input.
TV
Press this button to switch to the Antenna/DTV/CATV input.
5.
Memory Preset Buttons:
CUST
Press to recall settings for the current input from the “Custom” memory preset.
ISF NT (Night)
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
Input 1 and Input 2 have both S-Video and composite video connectors.
Input 3 has both component and composite video connectors.
To specify which connection type you are using – or to switch from one to
the other if equipment is connected to both – use the Input Selection menu
under Setup (refer to Input Selection on page 37).
Note