Verilux VP02 - Manual (Page 7)

6
SET-UP INSTRUCTIONS
Attaching the Parabolic Grid Diffuser
1. Remove protective packing from bulb.
2. Remove grid diffuser from protective plastic bag.
3. Insert plastic pegs at bottom of grid diffuser into openings near bulb
socket and snap tab into place.
4. Plug lamp into a standard 110-120V outlet, simply open the lamp
to switch it on and begin enjoying the benefi ts of Verilux ® Natural
Spectrum ® light!
Note: please allow a few minutes for the bulb to warm up to full
illumination.
Note: if bulb does not illuminate instantly, please refer to the
troubleshooting section of this manual.
TAB