VXI CP150 - Manual (Page 2)

1.
CONNECT HEADSET TO YOUR
CORDLESS OR MOBILE PHONE
For cordless or mobile phones with a compatible
2.5mm jack. insert the 2.5mm plug directly into
the headset jack on the phone.
For mobile phones requiring an adapter, insert the
2.5mm plug into the headset jack on the adapter.
OPERATION
1
6
2
3
4
5
7
1. Adjustable headband
2. T-Bar
4. Flexible microphone boom
5. Noise canceling microphone
6. 2.5mm connector
7. Rotation point
3. Receiver (Speaker)
COMPONENTS
For customer assistance, please call VXI at 1-800-742-8588 or visit
our website at www.vxiparrott.com.
3.
MICROPHONE ADJUSTMENT
Position the microphone so it is located one
finger-width from the corner of your mouth just below
your bottom lip. The microphone has the word TALK or
a painted dot embossed or printed on it (under the
cushion). Be sure that this mark is facing your mouth.
"TALK" or a painted dot
2.
C HOOSE A SIDE FOR THE MICROPHONE
AND ADJUST HEADBAND
Determine which side of your head you prefer
to locate the microphone. The microphone
rotates up and over to place the microphone
on the chosen side. The speaker also rotates
to adjust the cord if necessary.
Slide headband in or out of the side support for
best fit.