Installing sd memory card – Vivitar ViviCam X024 User Manual
Page 8
7
3.
Test photos taken with the camera should be downloaded otherwise they will be lost when the camera
loses power and turns off or when the battery door is opened to replace the batteries.
Installing SD Memory Card
An external memory card is required for normal use. Your camera supports any compatible SD memory card
(up to 8GB).
Adding a memory card will allow you to increase the capacity of your camera before you have to transfer test
photos to your PC.
1.
Locate the Memory Card slot on the side of the camera.
2.
Insert the Memory card into the slot in the correct direction. (see the sketch below)
3.
Push the card in until you feel it
“click” into position. The top of the card should be flushed with the
surface of the camera. An SD icon will appear on the LCD screen after you turn on your camera.