Vestax PDX-2300 - Manual (Page 9)

8
Connecting Phono terminal
Power Connection
With the RCA cable (accessory 7) and the GND cable (accessory
8), connect the output terminals and the GND terminal on the
PDX-2300 rear panel, and the phono input terminals to the
respective terminals on your amplifier/mixer.
• Do not expose this unit to direct sunlight, or install in an area
that is typically humid and/or damp.
• Place this unit on a stable, horizontal service in order to limit
vibration and poor tracing/action of the tone arm.
• Locate this unit at a suitable distance from any speakers so as
to avoid feedback.
• Interference may result from close proximity of an AM/FM
tuner.
Plug in the unit to a power outlet.
INSTALLATION AND CONNECTION
PDX-2300
REAR PANEL
RCA JACK WHITE WHITE L
RCA JACK RED R
GND TERMINAL
RCA CABLE WHITE/L WHITE/L
CABLE
Connection
CABLE
Connection
RCA CABLE RED/R
PHONO L Channel
PHONO R Channel
GND TRMINAL
AMP/AUDIO MIXER
GND GND CABLE BLACK
SUB
L R L R L R
L R
GND 1 GND 2
MAIN
PROFESSIONAL MIXING CONTROLLER
LINE 2 LINE 1
PHONO 2 MASTER OUT 2 PHONO 1
SESSION IN
MASTER OUT 1
POWER
SERIAL NO.
MADE IN JAPAN
C A U T I O N
RISK OF ELECTRIC SHOCK. DO NOT OPEN
WARNING;SHOCK HAZARD-DO NOT OPEN.
AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR.
R/RED L/WHITE
R/RED
L/WHITE
R/RED L/WHITE
R/RED L/WHITE
DJ MIXER PMC-07Pro
PDX-2300 PDX-2300
REMOTE R L OUTPUT
SERIAL NO. REMOTE R L OUTPUT
SERIAL NO.
Ensure that the GND (ground) terminal is firmly
connected to a mixer or amplifier. If the GND terminal
is not correctly connected HUM may persist.
Example
Player Installation
This unit has been manufactured to strict quality and
safety standards. PLEASE ENSURE that you use
the correct power supply as shown on the rear panel
of this device. FAILURE to do so many result in shock
and/or serious damage to this unit and/or users.