VocoPro ORANGE-300 - Manual (Page 15)

Programmed Playback
To INITIATE a custom PROGRAM track/file/scene sequence:
1. Press PROGRAM to bring up the program window
2. Use the number buttons to select a track
3. Once selected, press PROGRAM to enter it into the program
4. Repeat this procedure till you are complete with your program
NOTE: You can select up to 99 tracks to program. The program is maintained until the STOP button is pressed twice, the disc is
removed or the unit is turned off
To START/CANCEL PLAYBACK:
1. Press PLAY once to START and STOP twice to CANCEL a PROGRAM set
Radio Operations
To use the AM/FM stereo tuner to listen to broadcast RADIO:
1. Turn on POWER
2. Ensure that the ANTENNA is extended to its outermost position with sufficient room for
adjustment
3. Switch the FUNCTION SELECTOR to RADIO
4. Select a BAND from the BAND SELECTOR (AM, FM, FM-ST)
5. Find a STATION on the selected FREQUENCY BAND using the TUNING knob and re-adjust the ANTENNA if
necessary to improve reception
TV Operations
To use the TV tuner to watch broadcast TV:
1. Turn on POWER
2. Ensure that the ANTENNA is extended to its outermost position with sufficient room for adjustment
3. Switch the FUNCTION SELECTOR to TV
4. Ensure that the TV/AV button on the rear panel is set to TV. If video appears overlaid, reset the TV/AV button to
TV
5. Choose a BAND from the BAND SELECTOR (UHF, VHF)
6. Find a STATION on the selected FREQUENCY BAND using the TUNING KNOB and re- adjust the ANTENNA if
necessary to improve reception
NOTES:
-For the best signal, connect the unit to an aerial antenna using the external antenna jack or use the telescopic antenna
on the back of the unit
-Adjust the BRIGHTNESS, CONTRAST etc, via the controls on the rear panel if necessary
14